Do you have a question about the kathy ireland home and is the answer not in the manual?
Questions and answers
Ken Ingram
May 21, 2025
I lost the bracket that the ceiling fan attaches to to hang on the ceiling. I have a Crown Select Eco CF 4502, also need the bolts that hold the blades on
Related Manuals for Luminance Brands kathy ireland home
2. All wiring must be in accordance with the National accessories not designated for use with this product Electrical Code “ANSI/NFPA 70-2017” and Local by Luminance Brands could result in personal injury Electrical Codes. Use the National Electrical Code or property damage.
Luminance Brands. Substitution of parts or Fan Housing accessories not designated for use with this product by Luminance Brands could result in personal injury Flange Sets or property damage. Blade Sets Check to see that you have received the following parts: NOTE: If you are uncertain of part description, refer to exploded view illustration.
1. Unpacking Instructions (Continued) This Manual Is Designed to Make it as Easy as Possible for You to Assemble, Install, Operate and Maintain Your Ceiling Fan Tools Needed for Assembly WARNING One Phillips Head Screwdriver One Stepladder Before assembling your ceiling fan, refer to section One 1/4”...
3. How to Hang Your Ceiling Fan CAUTION CEILING To reduce the risk of injury, install the fan so that the blades are at least 7 ft. (2.1m) above the floor (Figure 1). WARNING The outlet box and joist must be securely mounted and capable of supporting at least 50 lbs.
4. How to Wire Your Ceiling Fan If you feel that you do not have enough electrical WARNING wiring knowledge or experience, have your fan installed by a licensed electrician. To avoid risk of fire or shock, check to see that all connections are tight, including ground, and that no bare wire is visible at the wire connectors, except for WARNING...
5. Ceiling Fan Assembly MOTOR BRACKET Once wiring is completed, lift the Motor Bracket so SLOTS (4) that the Four Threaded Studs on the Mounting Plate protrude through the Four Slots in the Motor Bracket (See Figure 7) . MOUNTING Securely tighten the Four 1/4”...
6. Using Your Ceiling Fan Restore Electrical Power to the Outlet Box by turning the Electricity on at the Main Fuse Box . Connect the Wood Pendant with Chain to the 3-Speed Switch Pull Chain using the Chain Coupling (Figure 11) . Check the operation of the Fan by gently pulling on the 3-Speed Switch Pull Chain (Figure 11) .
· by Luminance Brands. Substitution of parts or LED Light Fixtures accessories not designated for use with this product by Luminance Brands could result in personal injury or property damage. WARNING The use of any other control not specifically approved for this fan could result in fire, shock and personal injury.
10. Repair Parts 52” Part Numbers Model Number Model Number Model Number Description CF805SBS02 CF805SORB02 CF805SWW02 Switch Housing Assembly 762577-3 762577-9 762577-2 Flange Sets (set of 5) 762573-3 762573-6 762573 Blade Sets (set of 5) 765172-DC/MH 765172-DC/MO 765172-WW/BO Loose Parts Bag Containing: 762567-3 762567-1 762567-2...
What We Will Do To Correct Problems: If the defect is covered by this limited warranty, Luminance Brands will repair or replace the applicable Luminance Brands Ceiling Fan Product at no charge to You. If repair of the Luminance Brands Ceiling Fan Product is not practical or possible within a reasonable time and no replacement Luminance Brands Ceiling Fan Product can be provided, Luminance Brands will refund You the actual purchase price of Your Luminance Brands Ceiling Fan Product.
Page 12
SERIAL NUMBER: DATE CODE: The serial number of this fan can be found on the nameplate on top of the fan housing . The date code can be found on the carton and on top of the fan housing, stamped in ink on a white label . You should record this data above and keep it in a safe place for future use .
Need help?
Do you have a question about the kathy ireland home and is the answer not in the manual?
Questions and answers
I lost the bracket that the ceiling fan attaches to to hang on the ceiling. I have a Crown Select Eco CF 4502, also need the bolts that hold the blades on