Water Connections; Figure 1 Water Connections - Global Water Water Box Operation Manual

When you receive the water cooler, the water connections on
the back have tube plugs in them. These tube sections must be
removed before making all your connections. To remove the tube
sections see Page 9 "Disconnect". The 1/4" plastic tubing should be
used for making the Feed Water, Drain connections and Faucet
connections.
Note: If hard copper tubing is used for the Feed Water and Drain
connections the bulkhead fittings must be changed to a metal fitting.
5 | P a g e
Water Box Connections
Figure 1. Water Connections