Advertisement
Available languages
Available languages
7. Adjust motor belt
All motor belts are adjusted before the treadmill leave the factory, but after a period
of time of use, the belt will become flab and skid, this can be adjusted under the help
of the professional person.
Adjusting supporting plate
Adjusting spring
Pinch roller device
Motor belt
The adjustment steps:
(1) Open the motor cover, take out the side which is the connection of adjusting
spring and adjusting brace connecting plate.
(2) Put the adjusting spring into another proper hole on the adjusting brace
connecting plate.
(3) Adjust it until the belt is not skid around when it is loading.
(4) Install the motor cover again after adjusting it..
Advertisement
