Casio CTK-691 Midi Implementation Manual page 49

DSP Patch Parameter
The values of this parameter do not change when DSP Type and Tone Values are changed.
ParamID Parameter
2C DSP Type Number (Note 1)
2D DSP Hold
2E DSP Level
2F DSP Pan (Note 2)
Note 1:
Selects the DSP Type. Receipt of GM/GS Reset selects 014 Delay. 200 is stored when a tone-associated DSP is read into
the DSP area.
Note 2:
See "41.6 Pan Setting Value Table".
DSP Type parameter
The value of this block's parameter is rewritten whenever the DSP type or tone is changed.
ParamID Parameter
30 DSP Name A (Note 1)
31 DSP Name B (Note 1)
32r DSP Algorithm ID (Note 2)
33 DSP Chorus Send
34 DSP Reverb Send
Note 1:
These parameters change the DSP name. One character is indicated by each byte.
Note 2:
This value is the DSP algorithm ID, which cannot be changed directly. Changing the DSP type or tone number causes the
algorithm ID of the original DSP to be copied automatically to this parameter. See "41.16 DSP Algorithm ID Table".
DSP Type Independent Parameters
The first eight parameters listed below are DSP User Parameters whose settings can be configured from this Model's control
panel. The next 16 parameters are Internal Parameters that cannot be changed on this Model's control panel. The range of
these parameter values is 0 to 127, regardless of the DSP algorithm. However, the number of parameter types depends on
the DSP algorithm, which means that not all User Parameters and Internal Parameters are necessarily available as a particular
DSP's parameters. See the "Part VII DSP Parameter List" for details about parameter types and contents.
bit Value
08 00-C8
01 0-1
07 00-7F
07 00-7F
bit Value
20 0-FFFFFFFF
20 0-FFFFFFFF
07 00-3F
07 00-7F
07 00-7F
49
Default Setting Value (Decimal)
0E 0- 99 Preset
100-199 User
200 DSP of Tone
0 0...Off
1...On
64 0-127
40 -64 to 0 to 63
Default Setting Value (Decimal)
556e7469 MSB is leading character.
746c6564 MSB is leading character.
00 0-63
40 0-127
40 0-127