Casio CTK-691 Midi Implementation Manual page 47

Note 1:
See "41.7 -99 to 0 to 99 Setting Value Table".
Note 2:
See "41.4 -24 to 0 to 24 Setting Value Table".
Note 3:
See "41.6 Pan Setting Value Table".
Note 4:
This specifies the volume of data sent from System Chorus to System Reverb.
Note 5:
When "DSP Bypass" is specified for "DSP Line Bypass," the DSP Line Select settings of all parts are cancelled, and all
DSP lines are treated as if they are turned off. This means that notes that are currently sounding are not affected.
Drawbar Parameter
ParamID Parameter
0C Bar Position
0D Percussion
0E Percussion Decay Time
0F Click
Note 1:
See "10.20.3 Drawbar Position" for information about index numbers.
Note 2:
See "41.18 Drawbar Percussion Setting Table" for information about percussion setting values.
System Chorus
ParamID Parameter
10 Chorus Macro Num (Note 1)
11 Chorus Level
12 Chorus Rate
13 Chorus Depth
14 Chorus Feedback (Note 2)
15 Chorus Tone (Note 3)
Note 1:
Selects the System Chorus preset type. Receipt of GM/GS Reset selects Chorus3. The other System Chorus parameters
are changed to preset values in accordance with this type value. See "41.11 Chorus Type Setting Value Table."
Note 2:
Sets the System Chorus feedback volume.
Note 3:
Adjusts the System Chorus timbre.
index bit
Bar Num (Note 1) 02
0 02
0 07
0 01
bit Value
05 00-0F
07 00-7F
07 00-7F
07 00-7F
07 00-7F
07 00-7F
47
Value Default Setting Value
0-3 0
00-03 00
(Note 2)
00-7F 28
0-1 00
Default Setting Value (Decimal)
02 0-15
40 0-127
03 0-127
13 0-127
00 0-127
7F 0-127
(Decimal)
0-3
off,2nd,3rd,2nd+3rd
0-12.7sec
0...Off
1...On