Dsp Patch Parameter; Dsp Type Parameter; Patch Part Parameter List; System Exclusive Format - Casio CTK-671 Midi Implementation Manual

CTK-671 MIDI Implementation
24 MasEq Mid-Lo Gain 7
Selects the Master EQ mid-range gain.
See the "6.1.1.15 Equalizer Gain Setting Value Table."
25 MasEq Mid-Hi Freq 7
Selects the Master EQ mid-high frequency type.
See the "6.1.1.13 Equalizer Mid Frequency Setting Value Table."
26 MasEq Mid-Hi Gain 7
Selects the Master EQ mid-high range gain.
See the "6.1.1.15 Equalizer Gain Setting Value Table."
27 MasEq Hi Freq 7
Selects the Master EQ high-range cutoff frequency.
See the "6.1.1.14 Equalizer High Frequency Setting Value Table."
28 MasEq Hi Gain 7
Selects the Master EQ high-range gain.
See the "6.1.1.15 Equalizer Gain Setting Value Table."

• DSP Patch Parameter

This block also stores values when the DSP Type or Tone is changed.
ParamID Parameter bit
--------------------------------------------------------------------------------------------------------------------
2C DSP Type Number 7
Selects the DSP Type.
Receipt of GM On selects "014 Delay."
127 is stored when a tone-associated DSP is read into the DSP area.
2D DSP Hold 1
2E DSP Level 7
2F DSP Pan 7
See the "6.1.1.6 Pan Setting Value Table."

• DSP Type parameter

The value of this parameter is rewritten whenever the DSP Type or Tone is changed.
ParamID Parameter bit
--------------------------------------------------------------------------------------------------------------------
30 DSP Name A 20 0 - FFFFFFFF
31 DSP Name B 20 0 - FFFFFFFF
These parameters change the DSP name. One character is indicated by each byte.
32r DSP Algorithm ID 7
This value is the DSP algorithm ID, which cannot be changed at the user level.
Changing the DSP Type or Tone Number causes the algorithm ID of the main DSP to
be copied automatically to this area.
See "6.1.1.16 DSP Algorithm ID Table."
33 DSP Chorus Send 7
34 DSP Reverb Send 7
DSP Type Independent Parameters
00 - 40 - 7F 40 -12 - 0 - +12
00 - 7F 40 0 - 7
00 - 40 - 7F 40 -12 - 0 - +12
00 - 7F 40 0 - 2
00 - 40 - 7F 40 -12 - 0 - +12
Value Default Setting Value (Decimal)
00 - 7F 00 0 - 99 Preset
100 - 109 User
0 - 1 0 0...Off
1...On
00 - 7F 64 0 - 127
00 - 7F 40 -64 - 0 - 63
Value Default Setting Value (Decimal)
556e7469 MSB is first character.
746c6564 MSB is first character.
00 - 3F 00 0 - 63
00 - 7F 40 0 - 127
00 - 7F 40 0 - 127
The eight parameters listed below are DSP User Parameters that can be set from the
control panel, while the next 16 parameters are Internal Parameters that cannot be
edited on the control panel. The range of these parameter values is 0 to 127, regardless
of the DSP algorithm. However, the parameters that are available depend on the DSP
algorithm, which means that not all User Parameters and Internal Parameters are
necessarily available as a particular DSP's parameters.
See the "DSP Parameter List" for details about parameters and their contents.
ParamID Parameter bit
--------------------------------------------------------------------------------------------------------------------
38 DSP User Parameter0 7
39 DSP User Parameter1 7
3A DSP User Parameter2 7
3B DSP User Parameter3 7
3C DSP User Parameter4 7
3D DSP User Parameter5 7
3E DSP User Parameter6 7
3F DSP User Parameter7 7
40 DSP Internal Param00 7
41 DSP Internal Param01 7
42 DSP Internal Param02 7
43 DSP Internal Param03 7
44 DSP Internal Param04 7
45 DSP Internal Param05 7
46 DSP Internal Param06 7
47 DSP Internal Param07 7
48 DSP Internal Param08 7
49 DSP Internal Param09 7
4A DSP Internal Param10 7
4B DSP Internal Param11 7
4C DSP Internal Param12 7
4D DSP Internal Param13 7
4E DSP Internal Param14 7
4F DSP Internal Param15 7

3.2.3 Patch Part Parameter List

This list shows parameters that are specific for each part.

3.2.3.1 System Exclusive Format

+ --------------------- + ------------------------------------------------------------------ +
Field Value
+ ----- + ------------ + ------------------------------------------------------------------ +
01 SYSEX F0
02 MAN 44
03 MOD 11, 01
04 dev 00 to 1F, or 7F
05 act 0(IPC), 1(IPR)
06 cat Patch = 1
07 prm 00 - 7F
08 ilen 0
09 dlen bit size - 1
10 ps Parameter Set Number LSB,MSB = 00, 00
11 <index> Part Number(00-0F)
12 <data> See "2.1 Format."
13 <sum> None
14 EOX F7
+ ----- + ------------ + ------------------------------------------------------------------ +

3.2.3.2 Parameter List

• Basic parameter

ParamID Parameter bit
--------------------------------------------------------------------------------------------------------------------
50 Tone Number E
This value is the tone number allocated to this part.
13
Value Default Setting Value (Decimal)
00 - 7F - 0 - 127
00 - 7F - 0 - 127
00 - 7F - 0 - 127
00 - 7F - 0 - 127
00 - 7F - 0 - 127
00 - 7F - 0 - 127
00 - 7F - 0 - 127
00 - 7F - 0 - 127
00 - 7F - 0 - 127
00 - 7F - 0 - 127
00 - 7F - 0 - 127
00 - 7F - 0 - 127
00 - 7F - 0 - 127
00 - 7F - 0 - 127
00 - 7F - 0 - 127
00 - 7F - 0 - 127
00 - 7F - 0 - 127
00 - 7F - 0 - 127
00 - 7F - 0 - 127
00 - 7F - 0 - 127
00 - 7F - 0 - 127
00 - 7F - 0 - 127
00 - 7F - 0 - 127
00 - 7F - 0 - 127
Value Default Setting Value (Decimal)
000 - 189 Tone Number