Optional Accessories - Makita DGA404 Instruction Manual

OPTIONAL
ACCESSORIES
CAUTION:
• These accessories or attachments are recom-
mended for use with your Makita tool specified
in this manual. The use of any other accessories
or attachments might present a risk of injury to
persons. Only use accessory or attachment for
its stated purpose.
► Fig.29
-
1
2
3
4
5
6
7
8
9
10
11
12
13
14
-
NOTE: *1 Only for tools with M14 spindle thread.
NOTE: *2 Do not use Super flange and Ezynut together.
NOTE: *3 In some European countries, when using a diamond wheel, the ordinary guard can be used instead of the
special guard covering the both side of the wheel. Follow the regulations in your country.
NOTE:
• Some items in the list may be included in the
tool package as standard accessories. They
may differ from country to country.
100 mm (4") model
Wheel Guard (for grinding wheel)
Inner flange
Depressed center wheel / Flap disc
Lock nut
Rubber pad 76
Wheel Guard (for cut-off wheel) *3
Abrasive cut-off wheel / Diamond wheel
16 ENGLISH
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Makita genuine battery and charger
115 mm (4-1/2") model
Grip 36
Inner flange / Super flange *1*2
Lock nut / Ezynut *1*2
Back up pad
Flex wheel
Rubber pad 100
Abrasive disc
Sanding lock nut
Wire wheel brush
Wire cup brush
Lock nut wrench
125 mm (5") model
Inner flange / Super flange
Lock nut / Ezynut *2
Rubber pad 115