Recommended Footprint And Stencil Design; Recommended Compatible Footprint - Quectel BC66 Manual

NB-IoT Module Series
BC66&BC660K-GL Compatible Design
5
Recommended Footprint and
Stencil Design
This chapter introduces the recommended compatible footprint and stencil design of BC66 and
BC660K-GL. All dimensions are measured in millimeter (mm), and the tolerance for dimensions is
± 0.05 mm unless otherwise specified.

5.1. Recommended Compatible Footprint

The following figure shows the bottom views of BC66 and BC660K-GL.
Figure 15: Bottom Views of BC66/BC660K-GL
BC66&BC660K-GL_Compatible_Design 26 / 30