2.5
Location of the adjustment knob and power connector
3
Activation and operating
NOTE! The device should only be used indoors in a dry environment. The
device must not be used in a space where explosive or flammable materials
are handled, or in an ATEX-classified space.
3.1
Unpacking after transport
NOTE! If the product came with a separate instruction slip for removing the
transport supports, follow those instructions to remove the supports.
Carefully remove the surrounding packaging material (cardboard, plastics).
Be careful not to leave scratches when removing packing materials from
the surface of the device, especially when using a sharp object for removal.
For instructions on recycling the transport packaging, see section 4.4.
6 |
U n i q A i r
In the adjacent picture, marked as follows:
1) Air flow control knob
2) Device power connector
1
2