Contents SAFETY INSTRUCTIONS PRODUCT DESCRIPTION ACKAGE CONTENTS ECHNICAL SPECIFICATIONS YPE PLATE ANUFACTURER INFORMATION OCATION OF THE ADJUSTMENT KNOB AND POWER CONNECTOR ACTIVATION AND OPERATING NPACKING AFTER TRANSPORT OSITIONING THE DEVICE ONNECTING THE POWER CORD IRFLOW ADJUSTMENT IPS FOR USE SERVICE AND MAINTENANCE EPLACING THE PREFILTER EPLACING THE MAIN FILTER CARTRIDGE LEANING THE DEVICE...
The manufacturer is not liable for personal injury or damage to property resulting from improper use. General safety instructions: Only use UniqAir approved filters and replacement parts. • Do not block or cover the air inlet or outlet.
Product description UniqAir PRO is an efficient air purifier designed for indoor air. Air enters through the openings on the top of the device, and clean air is blown out of the corresponding openings at the bottom. The device removes:...
Technical specifications Model UniqAir PRO Dimensions H 1104 x W 317 x D 317 mm Weight (with filters) 27 kg Noise level 30,5–53 dB(A) Purifying rate (degree of ≥ 99 % for particles ≥ 0,1 µm in size, separation) 100 % for gases*...
Unplug the power cord before opening the cover to turn off the device. Below is an example of the nameplate and a device with the cover open. Manufacturer information UniqAir Oy www.uniqair.fi Tuomikatu 28 info@uniqair.fi...
Location of the adjustment knob and power connector In the adjacent picture, marked as follows: 1) Air flow control knob 2) Device power connector Activation and operating NOTE! The device should only be used indoors in a dry environment. The device must not be used in a space where explosive or flammable materials are handled, or in an ATEX-classified space.
Positioning the device Equipped with wheels, the UniqAir PRO is easy to place anywhere in a room. To ensure the greatest effectiveness, make sure that the air flow is as unobstructed as possible in front and on the sides of the device. If possible, place the device so that no wall, cabinet or other furniture impedes airflow in the vicinity of the device.
Airflow adjustment The airflow of the UniqAir PRO air purifier can be steplessly adjusted with the controller shown in the adjacent figure. To adjust airflow, turn the knob so it points to the desired amount of airflow. The unit of...
Replacing the main filter cartridge The main filter cartridge should be replaced every 12 to 18 months, depending on the space in which the device is used. NOTE! Replace the complete cartridge as one unit. Do not try to open the used cartridge. 1.
Prefilters Dispose of used prefilters as energy waste. Main filter cartridges We recommend that you return used main filter cartridges to your UniqAir contact person or reseller. This will allow us to ensure their proper recycling. If returning them is not possible, used filter cartridges can be disposed of as landfill waste.
Replacing the power connector fuse The UniqAir PRO air cleaner power connector is equipped with its own fuse. 1. Disconnect the power cord from the device. 2. Open the fuse box of the power connector by pulling on the tabs circled in the adjacent picture.
Directives and certificates UniqAir Pro meets the product requirements of the following directives set by the European Union: EMC Directive, Electromagnetic Compatibility (2014/30/EU) • Low Voltage Directive (2014/35/EU) • Machinery Directive (2006/42/EC) • Restriction of the use of certain hazardous substances in electrical •...
Check that the pre- and main filters are firmly in place. Follow • the instructions for replacing the main filter up to removing the filter. If experiencing other issues, contact UniqAir Customer Service. U n i q A i r | 13...
Warranty conditions These warranty conditions apply to all new UniqAir air purifiers. 1. UniqAir air purifiers have a manufacturer's warranty. 2. The warranty is two (2) years from the date of delivery of the product. 3. The warranty covers defects and faults that occur during the warranty period due to manufacturing defects or faults in the product’s materials.