Airflow Adjustment; Tips For Use; Service And Maintenance; Replacing The Prefilter - UniqAir PRO User Manual

Table of Contents

Advertisement

3.4

Airflow adjustment

The airflow of the UniqAir PRO air purifier can be
steplessly adjusted with the controller shown in the
adjacent figure. To adjust airflow, turn the knob so it
points to the desired amount of airflow. The unit of
the air flow adjustment scale is m
3.5

Tips for use

We recommend using the UniqAir PRO air purifier around the
clock, including on weekends.
Choose the highest possible power setting to achieve the best
effect.
4

Service and maintenance

IMPORTANT! Before performing maintenance, make sure that the
appliance is switched off by unplugging the power cord.
4.1

Replacing the prefilter

The prefilter should be replaced every 3-4 months.
The prefilter is located below the top cover. The prefilter is held in place by
the loose wooden frame on top of it.
1. Lift the prefilter and the wooden frame simultaneously from the
side opposite the hinges, so that they fit past the hinges of the
cover.
2. Lift the prefilter and the wooden frame out of the device.
3. Place the wooden frame on top of the new prefilter.
4. Make sure that the airflow direction arrow marked on the prefilter
is pointing downwards.
5. Lower the new prefilter and the wooden frame back into the same
position inside the device.
6. Make sure that the prefilter is straight and firmly in place.
8 |
U n i q A i r
3
/h.

Advertisement

Table of Contents
loading

Related Products for UniqAir PRO

Table of Contents