Connecting The Power - UniqAir Uniq 2 User Manual

3.4 Connecting the Power Cord
1. Check that the power cord is externally intact. If the cord is
damaged, contact UniqAir's customer service.
2. Connect the power cord to the connector on the bottom of the
device as shown on the picture below.
3. Plug the other end of the power cord into a grounded electrical
outlet.
NOTE! The mains voltage of the outlet must correspond to the voltage
indicated on the type plate.
WARNING! Electrical safety hazard. Only connect the appliance to a
grounded outlet.
U n i q A i r | 7