Responsibility And Liability; Manufacturer; Installer; User - NSF Hydraloop H350 Owner's Manual

1.3 Responsibility and Liability

1.3.1

Manufacturer

Hydraloop warrants the proper working of the system according to its general sales conditions.
As a manufacturer, Hydraloop is not liable in the following cases:
-
Failure to follow the instructions for installation and maintenance of the Hydraloop.
-
Failure to follow the instructions for use of the device.
-
Inadequate or insufficient maintenance of the device.
1.3.2

Installer

The installer is responsible for the installation and initial commissioning of the Hydraloop device.
-
The Hydraloop device should always be installed according to the local legislation and standards.
-
Perform initial commissioning and necessary checks.
-
Explain the installation to the user.
-
Hand over all manuals to the user.
1.3.3

User

To ensure optimal functioning of the Hydraloop device, please observe the following:
-
Read and observe the instruction manuals of the Hydraloop device.
-
Request the assistance of a qualified installer for installation, commissioning, service and
maintenance.
-
Ask the installer for an explanation of the installation.
HL-20210202 Hydraloop Owner Manual 5