Safety; General Safety Instructions; Recommendations - NSF Hydraloop H350 Owner's Manual

1. Safety

1.1 General safety instructions

WARNING
-
Read this manual before installing and/or using the Hydraloop.
-
This Hydraloop creates NON-POTABLE water. DO NOT use the output water as drinking
!
water.
-
The Hydraloop devices should only be opened or serviced by authorized
persons/installers. Risk of electric shock may occur.
-
The Hydraloop should be place and installed according to installation directions for save
operation.
WARNING
!
-
A damaged power supply cable should always be replaced by authorized
persons/installers to avoid dangerous situations.
-
Always disconnect the Hydraloop from the mains before servicing or maintenance.
ATTENTION
!
-
After servicing the Hydraloop, the installation should always be checked for leakages.

1.2 Recommendations

ATTENTION
! -
The Hydraloop should only be placed indoor with an ambient temperature between
14-35°C | 57-95°F.
-
The Hydraloop should never be placed in direct sunlight.
-
The Hydraloop should always be easily accessible for service and maintenance
ATTENTION
!
-
The Hydraloop should only be moved or transported in an upright, vertical position.
ATTENTION
!
-
Never use greywater from kitchen sinks, dishwashing machines or laundry machines as
input water to the Hydraloop. Only use water from shower, bath, or air conditioning units.
HL-20210202 Hydraloop Owner Manual 4