DRIVER'S UNIT FUNCTIONS
DESIRED RESULT:
G
E
N
E
Turn on the headset
Turn off the headset
Increase the volume
Decrease the volume
P
H
O
Answer a call
Reject a call
Terminate a call
Voice Dial
Redial
Enable/Disable voice
command feature
REQUIRED ACTION:
R
A
L
F
Press the Control Button steadily for at least 6 seconds
Press the Control Button steadily for at least 3 seconds
Short press the Volume Up Button.
Short press the Volume Down Button.
N
E
F
U
Short press the Control Button or speak loudly any word
of your choice.
Short press the Intercom Button or remain silent for 15
seconds.
Long press the Intercom Button. For some mobile phones
you may need to press the Control Button to end the call.
During standby, short press the Control Button and state
the name of the person you wish to call. This feature is
supported only by mobile phones that support the Voice
Dial feature.
During standby, long press the Intercom Button
Long press the volume up and down buttons
simultaneously until you hear a beep. The default status
is voice command enabled.
9
U
N
C
T
I
N
C
T
I
O
O
N
S
N
S
Need help?
Do you have a question about the Scala-rider TeamSet and is the answer not in the manual?
Questions and answers