Passenger's Unit Functions - Cardo Systems Scala-rider TeamSet Quick Manual

DRIVER'S UNIT FUNCTIONS (continued)
DESIRED RESULT:
I N T E
Start using the intercom
Terminate the operation
of intercom
Conference Call (add
passenger to an active
call)
End Conference Call
(release passenger
from a conference call)
Enable/Disable Voice
Command feature

PASSENGER'S UNIT FUNCTIONS

DESIRED RESULT:
Turn on the headset
Turn off the headset
Start using the intercom
Terminate operation
of intercom
Enable/disable
Always On Intercom
Increase intercom volume Short press Volume Up Button
Decrease intercom volume Short press Volume Down Button
REQUIRED ACTION:
R C O M
During standby, start speaking loudly to activate the
intercom
Stop speaking. The audio connection will be terminated
within 25 seconds.
During an active phone call, tap the Intercom Button.
During a conference call, tap the Intercom Button.
Long press the volume up and down buttons until you
hear a beep. The default status is Voice Command
enabled.
REQUIRED ACTION:
Press the Control Button steadily for at least 3 seconds
Press the Control Button steadily for at least 3 seconds
During standby, start speaking loudly to activate the
intercom
Stop speaking. The audio connection will be terminated
within 25 seconds.
During standby, short press the Control Button.
One tone = Always On intercom.
Two tones = Voice Controlled (VOX) intercom
10
F U N C T I O N S