Download Print this page

Charging Instructions; Power On/Off - RadioMaster T8 Lite User Manual

Advertisement

Charging Instructions

The T8 Lite has a built in 1000mah 3.7v Battery. The built in USB-C charger will
charge your batteries by connecting the supplied USB-C cable to any suitable
USB power outlet. We suggest using a regular 1-2amp 5v USB power adapter.
Charge status and battery Level:
The 5 LEDs below the neck strap loop indicate the charging status. When the
LEDs light up from left to right the T8 Lite is charging. Each of the 5 LEDs
indicates 20% of the battery capacity. 5 LEDs shows 100% charge, 4 LEDs 80%,
3 LEDs 60%, 2 LEDs 40%, 1 LED 20%. When the radios power is low and the T8
Lite requires charging all 5 battery status LEDs will flash at the same time. Please
recharge the batter before using the radio any further
Status
Power Level
Recharge

Power on/off

Power on: Press and hold the power button, the five status LEDs will light up
sequentially followed by a beep. Let go of the power button after you hear the beep.
Power off: Press and hold the power button, the five status LEDs will turn off
sequentially followed by a beep. Let go of the power button after you hear the beep.
Default channel order:
CH1
CH2
Aileron Elevator Throttle Rudder
Five indicator lights indicate 0-100% power,
and on average each indicator indicates 20% power
20% 40%
The indicator light flashes from 1 to 5 cycles, indicating that it is
charging, and all the indicator lights are always on after the
charging is completed
CH3
CH4
Indicator light
60% 80% 100%
CH5
CH6
SA
SB
2Position
3Position
CH7
CH8
SC
SD
3Position
2Position
3

Advertisement

loading