Safety Precautions - Nautilus Hyosung MS500 Installation Manual

Hide thumbs Also See for MS500:
Table of Contents

Advertisement

Installation Manual

Safety Precautions

► Common Safety Precaution
► Please read the following instructions before operating equipment.
► CAUTION
▪ Safety Precautions in outlined this manual provide information on safe and proper
handling of the product. Non-compliance of the safety precautions may result in injury
or damage to the product.
▪ This precaution symbol with sample term tells you safety warnings during equipment
handlings.
▪ Operate equipment in the order outlined in this manual.
▪ Follow precautions indicated in this manual, as well as the equipment itself.
Failure to properly address these precautions may lead to injury or damage to the
product.
▪ Avoid operations not addressed in this manual.
▪ If you cannot remedy system problems using the methods outlined in this manual,
please refer to contact information listed in the manual.
▪ Any change or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user's authority to
operate the equipment.
<Note!>
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
1. To reduce the risk of fire, use only No. 26 AWG OR LARGER Telecommunication
cord
2. Risk of explosion if battery is replaced by an incorrect type.
Dispose used batteries according to the instructions.
3. For pluggable equipment, the socket-outlet shall be installed near the equipment and
shall be easily accessible.
4. The equipment is to be secured to the building structure before operation
5. A security container shall be permitted to optionally be provided with a secondary
lock, but improper use of the secondary lock feature will reduce the security level of
the ATM.
© 2016 Nautilus Hyosung Inc. All Rights Reserved.
Chapter1.Preface
1-4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents