G. Paniz AE 80 Instruction Manual page 7

ESPIRAL DOUGH MAKER AE 80
- Be sure to keep this manual for future reference.
- Installation should be done in accordance with the manufacturer's directions by qualified
and component people.
- In case of repairs, use exclusively technical assistence authorized manufacturer,
requesting original replacement parts.
- Failure to follow directives may put in risk operator's safety.
- Make contact with distributor whom you trust to obtain the authorized assistence center
nearest you.
- The manufacturer reserves the right to alter, any moment, and without prior notice the
contents of this manual.
- This manual provides technical information for a correct installation and functioning of the
equipment. The operator has the duty and responssibility to be guided by it. Contents includ
a description of the caracteristics, funtioning, installation and maintenance, as well as aspect
pertaining to operator safety.
- Before using the equipment, it is necessary to consult this manual. We recommend that it be
read carefully and that its instruction be followed rigorously. To preserve operator safety, the
equipment should be maintained in perfect condition.
- This manual is an integral part of the equipment, and should be kept in a place of easy
access, known by all of its operators, and made avaliable to all persons responsible for its
functioning and repair.
- Before using the equipment, and each time that a doubt arises about its functioning, each
operator has the responsability of reading carefully this manual.
- In the process of product installation or during maintenance, use all responsible means
necessary to prevent injury to peaple and to the machine.
- Upon finishing the removal or neutrlization of any part related to the safe use of the machine
(sensors protective parts, etc.) Replacethem in their proper place and make sure that the
security mechanisms are correctly positioned.
- The merchandise is shipped at the client's risk. Any claims that may be made concerning a
defective condiction of the machine should be presented to the shipper at the time of delivery.
6
UTILITÁRIO REF.: AE 80
CÓDIGO DESCRIPCIÓN DE LAS PIEZAS
1 - 02929 - CONJUNTO INFERIOR AE 80
2 - 02928 - CONJUNTO SUPERIOR AE 80
3 - 02930 - CONJUNTO TAPA SUPERIOR AE80
4 - 05240 - TAPA TRASERA AE 80 1194 X 500MM.
5 - 05256 - PROTECCIÓN GRASA AE 80 335 X 320MM.
6 - 05229 - TAPA LUBRICACIÓN AE 80 176 X 376
7 - 05253 - PROTECCIÓN INTERNA DEL PANEL AE 80
8 - 05223 - PANEL ELECTRÓNICO AE 80 215 X 215MM.
9 - 02939 - PERFIL DE ACABADO 6110 AE 80
10 - 05204 - SOPORTE FIJADOR DE TAPA SUPERIOR.
11 - 03944 - MOTOR TRIFÁSICO 4,0/6,3 8/4P 220 50HZ
11 - 03918 - MOTOR TRIF 4,0/6,3 8/4P 380 50HZ
11 - 02937 - MOTOR TRIF 4,0/6,3 8/4P 380 60HZ
11 - 02938 - MOTOR TRIF 4,0/6,3 8/4P 220 60HZ
12 - 05219 - POLEA MOTOR AE 80 US
13 - 05220 - POLEA TRANSMISIÓN AE 80
14 - 05250 - ESPIRAL AE 80
15 - 05227 - EJE TRANSMISIÓN TRASERO AE 80
16 - 05210 - CONJUNTO OLLA ACERO INOXIDABLE AE 80
17 - 05252 - PROTECCIÓN DE ALAMBRE AE 80
18 - 05206 - ENGRANAJE Z 48 ASA 60 AE 80
19 - 05237 - ENGRANAJE SUPERIOR Z 16 ASA 60 AE 80
20 - 05239 - CONJUNTO ENGRANAJE Z 48/Z 16 ASA 60
21 - 05238 - ENGRANAJE INFERIOR Z 16 ASA 60 AE 80.
22 - 05206 - ENGRANAJE Z 48 ASA 60 AE 80
23 - 02906 - CADENA ASA 60
24 - 02906 - CADENA ASA 60
25 - 02906 - CADENA ASA 60
26 - 01198 - CORREA 13 A 940 MC
27 - 02902 - COJINETE F 209 DS AE
CÓDIGO DESCRIPCIÓN DE LAS PIEZAS
28 - 02903 - RODAMIENTO UC 209
29 - 02897 - RODAMIENTO 6308 Z
30 - 02899 - ANILLO ELÁSTICO I 90
31 - 05258 - COJINETE GUÍA DEL RODAMIENTO AE 80
32 - 70194 - RODAMIENTO 6209 ZZ
33 - 05257 - ARANDELA DENTADA AE 80 75 X 2MM.
34 - 02898 - TUERCA CON ACOPLE H310
35 - 02896 - RODAMIENTO CÓNICO 30210
36 - 05218 - COJINETE DELANTERO / TRASERO
37 - 02895 - RODAMIENTO CÓNICO 30212
38 - 70193 - RODAMIENTO 6014 ZZ
39 - 05236 - COJINETE RETÉN MAYOR AE 80 140MM.
40 - 02901 - RETÉN 50561
41 - 05230 - CONJUNTO EJE SUPERIOR AE 80
42 - 05233 - CONJUNTO EJE INFERIOR AE 80
43 - 05243 - SOPORTE APOYO PROTECCIÓN MASA AE 80
44 - 05242 - APOYO PROTECCIÓN MASA AE 80
45 - 05241 - PROTECCIÓN DE LA MASA AE 80
46 - 00725 - LLAVE DEL MICRO INTERRUPTOR MG 2603
47 - 05251 - SOPORTE PROTECCIÓN AE 80 38,5MM.
48 - 05248 - BUJE DE APOYO PROTECCIÓN DE ALAMBRE
49 - 02908 - TEMPORIZADOR THOLS DTL 054
50 - 03914 - LLAVE ENCIENDE / APAGA UNIP 15A
51 - 02524 - PATA DE GOMA CIA 0767 CSP600
52 - 00772 - ACCIONADOR DEL MICRO INTERRUPTOR
53 - 05259 - SOPORTE PROTECCIÓN GRASA AE 80
54 - 00983 - ANILLO ELÁSTICO I 85
55 - 02568 - CONJ. LLAVE ARRANQUE TRIFÁSICA 380V
55 - 02571 - CONJ. LLAVE ARRANQUE TRIFÁSICA 220V
11