Positioning The Projector; Adjustable Feet - Canon LV-5200 Owner's Manual

Canon lv-5200: user guide

Hide thumbs Also See for LV-5200:

Brochure & specs (2 pages)

Table Of Contents

Table of Contents

G This projector is designed to project on a flat projection surface.

G The projector can be focused from 3.6'(1.1m) ~ 31.8'(9.7m).

G Refer to the figure below to adjust a screen size.

H1 : H2 = 9 : 1

3.6' (1.1m)

24"

Screen Size

(W x H) mm

490 x 367

Zoom (min)

3.6' (1.1m)

Zoom (max)

–––––

Picture tilt and projection angle can be adjusted by rotating the

Adjustable Feet. Projection angle can be adjusted to approx. 16

degrees.

Lift the front of the projector and pull the Feet Lock Latches

on both sides of the projector.

Release the Feet Lock Latches to lock the Adjustable Feet

and rotate the Adjustable Feet to fine tune the position and

the tilt.

To retract the Adjustable Feet, lift the front of the projector

and pull the Feet Lock Latches and push to feet upward.

Keystone distortion of a projected image can be adjusted by

Menu Operation. (Refer to P20 and 36.)

CAUTION

Avoid positioning the projector with the angle of more than 20

degrees. The Projection Lamp may malfunction. Refer to page 8.