Download Print this page

Specifications - Canon CanoScan LiDE 90 Quick Start Manual

Flatbed scanner

Advertisement

Scanning in the Upright Position
This scanner can be used in the upright position. Use the supplied stand when scanning on the stand.
Setting the Stand
Put the scanner on the stand, fitting the two holes on the scanner
side to the projections on the stand.
Lean the scanner toward the stand.
Fasten the stand hook to the marked position on the scanner until it clicks.
Refer to the Scanning Guide (on-screen manual) for further information about ScanGear, MP Navigator EX, Scanner Buttons, and Troubleshooting. To start the Scanning Guide, double-click the on-screen manual
icon on the desktop.
In this guide, Windows Vista screen shots are used to illustrate explanations common to all operating systems.

Specifications

Scanner Type
Sensor Type
Light Source
*1
Optical Resolution
Selectable Resolution
Color
Scanning Bit Depth
Grayscale
Color
*2
Scanning Speed
(Photo or Document)
Grayscale, B&W
Interface
Maximum Document Size
Scanner Buttons
Temperature
Operating Range
Humidity
Power Requirements
Power Consumption
Exterior Dimensions (W) x (D) x (H)
Weight
*1
Optical Resolution represents the maximum sampling rate based on ISO 14473.
*2
The fastest speed in USB 2.0 Hi-Speed mode on Windows PC. Transfer time is not included. Scanning speed varies according to the document types, scan settings, or specifications of the computer.
• Specifications are subject to change without notice.
Model Number: K10300 (CanoScan LiDE 90)
FCC Notice (U.S.A. Only)
Model Number : K10300
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of a shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the
equipment.
Canon U.S.A., Inc.
One Canon Plaza
Lake Success, NY 11042
1-516-328-5600
®
E
S
As an
NERGY
TAR
Partner, Canon Inc. has determined that this product meets the
guidelines for energy efficiency.
Warning
When you use this product, you should pay attention to the following legal issues:
• Scanning of certain documents, such as bank notes (bank bills), government bonds and public certificates, may be prohibited by law and may result in criminal and/or civil liability.
• You may be required under law to obtain authorization from a person possessing copyrights or other legal rights to the item being scanned.
If you are uncertain of the legality of scanning any particular item, you should consult your legal adviser in advance.
• Microsoft is a registered trademark of Microsoft Corporation.
• Windows is a trademark of Microsoft Corporation, registered in the U.S. and other countries.
• Windows Vista is a trademark of Microsoft Corporation.
• Macintosh and Mac are trademarks of Apple Inc., registered in the U.S. and other countries.
• Adobe is either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and or other countries.
• ©ArcSoft, Inc. All rights reserved for PhotoStudio.
• Other names and products not mentioned above may be registered trademarks or trademarks of their respective companies.
Positioning an item
Place a document on the document glass.
Close the document cover carefully to prevent the document from
moving over.
CIS (Color Contact Image Sensor)
16 bit input/16 bit or 8 bit output for each color
2.7 msec./line (300 dpi), 5.0 msec./line (600 dpi), 9.6 msec./line (1200 dpi), 18.9 msec./line (2400 dpi)
2.3 msec./line (300 dpi), 1.7 msec./line (600 dpi), 3.2 msec./line (1200 dpi), 6.3 msec./line (2400 dpi)
4 buttons (COPY, PHOTO, PDF, E-MAIL)
10% to 90% RH without condensation formation
Supplied via USB port (No external adapter required)
In operation: 2.5 watts maximum, Stand-by: 1.0 watts, Suspend: 9 mwatts
250 x 364 x 40 mm (9.9 x 14.4 x 1.6 in.)
E
S
NERGY
TAR
Removing the Stand
To remove the scanner from the stand, press the hook.
Release the scanner from the hook.
Lift the scanner off.
CanoScan LiDE 90
Flatbed
3-color (RGB) LED
2400 x 4800 dpi
25-19200 dpi (ScanGear)
16 bit input /8 bit output
USB 2.0 Hi-Speed
A4/Letter: 216 x 297 mm
5°C to 35°C (41°F to 95°F)
Approximately 1.6 kg (3.5 lbs.)
®

Advertisement

loading

This manual is also suitable for:

2167b002 - canoscan lide 90