Canon CanoScan LiDE 500F Quick Start Manual page 18

Scanning Film
Scanning Film
1
Place the film in the film guide.
Place the film face up in the film guide (images and
words should read correctly from above) with the
spaces between frames aligned with the white lines on
the guide.
2
Remove the cap from the film adapter unit
and gently set the unit over the frame you
wish to scan.
Align the tab on the film adapter unit with the film
guide.
• Do not move the film adapter unit
once it has been placed on the fIlm
guide. Sliding it may scratch the
film.
3
Gently close the document cover.
• The document cover does not touch the document glass completely. Be careful not to
force the document cover down.
4
Start ArcSoft PhotoStudio.
Refer to step 2 on page 12.
5
Start ScanGear CS.
Refer to step 4 on page 13.
6
Select a Select Source option.
You can select from the following options for films.
Negative Film (Color) / Positive Film (Color)
• Use ScanGear CS's Advanced Mode
to scan monochrome films (See the
Scanning Guide.).
18
White Line