Connect The Scanner - Canon CanoScan LiDE 20 Quick Start Manual

00-QSG_E_M_MAIN.fm Page 7 Friday, May 10, 2002 6:31 PM

Connect the Scanner

• Confirm that the Scanning Unit is unlocked. (P.6)
1 1 1 1
Peel the caution seal on the back of the scanner.
2 2 2 2
Connect the scanner to the computer with the supplied USB interface cable.
Windows
Macintosh
Wide Flat Connector
• Only use the USB interface cable provided with the scanner. Use of other cables may
lead to a malfunction.
• The scanner does not have a power switch. The power is activated as soon as the
computer is turned on.
USB Interface Cable
Wide Flat Connector
USB Interface Cable
Small Square
Connector
Small Square Connector
7