Using The Scanner Buttons; Scan Button; Copy Button - Canon CanoScan LiDE 20 Quick Start Manual

00-QSG_E_M_MAIN.fm Page 11 Friday, May 10, 2002 6:31 PM

Using the Scanner Buttons

You can use the three convenient buttons on the front of the scanner to scan and perform related tasks
easily with a single touch of the button. Place an item on the scanner before pressing a button
.
• To use these buttons, ScanGear CS, CanoScan Toolbox and ArcSoft PhotoBase should be
installed from the CanoScan Setup Utility CD-ROM.

SCAN Button

To open the scanned image in the PhotoBase
window:
1 1 1 1
Press the [SCAN] button.
2 2 2 2
The scanner will scan the item.
3 3 3 3
The scanned image will appear in the
PhotoBase window.

COPY Button

To print (copy) the scanned image with a printer:
1 1 1 1
Press the [COPY] button.
2 2 2 2
The scanner will scan the item.
3 3 3 3
The scanned image will print.
• The printer driver should be installed and the
printer should be on-line to use this function.
• While scanning, you can change the default settings for scanning by clicking the
[Cancel] button. For changing settings or arranging the scanner button assignments,
refer to the CanoScan Toolbox section of Scanning Guide (HTML format manual).
E-MAIL Button
To e-mail the scanned image as an attached file:
1 1 1 1
Press the [E-MAIL] button.
2 2 2 2
The scanner will scan the item.
3 3 3 3
The [E-mail software selection] dialog
will appear. Select an option from the
list and click [OK].
This step is required only for the first scan.
4 4 4 4
The e-mail software will start and the
scanned image will be attached in a
new message window.
5 5 5 5
Enter the receiver's address and title,
write a message, confirm the required
settings, and send the message.
• The e-mail software such as Outlook Express,
Microsoft Outlook, Eudora or Netscape
Messenger should be installed and enabled.
With certain e-mail programs, you should
enable MAPI function (for Windows).
11