Model Establishment And Illustration - ANDELI MIG-270E User Manual

Enlarge the input , output and grounding cable according to the cable length.
Remark: the specifications of fuse and circuit breaker in the table above are only
for reference.
4．Installation of the machine
The power supply should be single phase AC 220v/50Hz. Use a distribution
cabinet with an automatic air switch. Ensure safe grounding.
4.1 MMA welding：
 Connect welding cable to the machine.
 Turn off the machine.
 Connect the input cable to the distribution cabinet, switch on.
4.2 MIG welding：
 Connect the earth cable to the negative pole, feeder cable to the positive pole.
 Connect the hose to the machine and gas bottle.
 Turn off the machine.
 Connect the input cable to the distribution cabinet, switch on.

Model establishment and illustration

MIG series welding machine model establishment and description as
shown in figure 1
M I G —— ×××
Model
CO2 gas shielded
Semi-automatic
MIG/MAG
( Figure 1 ) MIG series welding machine model establishment and description.
- 10 -