Canon PIXMA Pro9500 Mark II Getting Started page 27

Windows
12
When this screen appears, click OK.
Printing of the pattern starts.
• Wait until the pattern printing ends (about 10 minutes), and go to
the next step.
• Do not open the Top Cover (C) while printing.
• Pull out the Front Tray Extension (D) beforehand.
Macintosh
C
D
13
Make sure that the pattern shown is printed.
Some parts of patterns printed on the first page are faint.
• If you align the Print Head automatically again, patterns different from those shown above may be
printed.
• When Print Head Alignment cannot be executed properly, the Alarm lamp (E) will flash orange
11 times. In this case, refer to "When Printing Becomes Faint or Colors Are Incorrect" in the on-
screen manual: Basic Guide.
5
1 2 3 4
E
6