Canon PIXMA PRO-200S Installing

以下步驟及畫面僅供參考，實際操作畫面可能因裝置型號、系統或軟件版本而有所不同。
The following steps and screens are for reference only, and the actual operation screens may vary depending on
the device model, system, or software version.
無線設定 Wireless Setup
確保在開始無線連接設定之前，印表機已開啟。
1.
如果電源開啟，電源指示燈將亮起。
Make sure printer is turned on before starting wireless connection setup.
If the power is on, the ON lamp will be lit.
按主頁按鈕。
2.
Press the HOME button.
使用上或下（
3.
Use the up or down (
在 Mac OS 以無線方式安裝及連接 PIXMA PRO-200S 打印機
Installing PIXMA PRO-200S on Mac OS via WiFi connection
）按鈕選擇 LAN 設定，然後按 OK 按鈕。
) button to select LAN settings and press the OK button.
1