Horizon Fitness ANDES 3 Operation Manual page 5

ANDES 3 CONSOLE OPERATION
Note: There is a thin protective sheet of clear plastic on the overlay of the console that should be removed before use.
A) LCD DISPLAY WINDOWS: Time, Distance, Speed, RPM, Resistance Level, Heart Rate, Calories, Watts, HR Wheel,
Resistance Profile.
B) ENERGY SAVER: to minimize energy consumption, your machine will enter energy saver mode automatically (after
entering stand-by mode for 15 mins) and can be quickly woken up with a touch of a button.
C) ARROW BUTTONS: used up and down arrow button to select program, set up your console or change resistance
while exercising.
D) ENTER BUTTON: used to confirm setting of workout program or user profile.
E) START AND STOP BUTTON: press to begin exercising, pause your workout or resume exercising after pause. Hold
for 3 seconds to reset the console.
F) CHANGE DISPLAY / BACK BUTTON : used to scroll through display modes and workout feedbacks. Press to switch
display column and change between profile display mode for resistance(upper bar displayed) or watt profile for your
current workout watt (lower bar displayed).
also used to navigate back to the user setup progress.
G) RESISTANCE DIRECT BUTTON: use the direct button to chose your desired workout resistance.
H) SMART DEVICE AND READING RACK: holds your smart phone, tablet or reading materials.
HZ15_OG_Andes 3_5_7i_r1_0 011516'.indd 5
ANDES 3
5
2016/1/15 上午11:36