Pentagram horNET Wi-Fi PCI 11g Installation And Operation Manual page 16

•
Server Certification Tab
Use certificate chain – Enable this option, to enable the certification feature and select
the certificate issuer.
Allow intermediate certificates – Select this option to allow the use of intermediate
certificates. These certificates must be located on the certification chain between the
server certificate and the server selected from list.
Server name – Enter the name of the authentication server.
OK – Closes profile configuration and saves settings.
Cancel – Closes profile configuration without saving settings.
•
EAP Fast Tab
Allow unauthenticated provision mode – During the PAC can be provisioned
(distributed one
unauthenticated provision mode and use EAP-MSCHAP v2 authentication to
authenticate now. It causes to continue with the esTablishment of the inner tunnel even
though it is made with an unknown server.
Use protected authentication credential – During the PAC can be provisioned to the
client manually via disk or a secured network distribution method. Click Import, to
browse for PAC settings file or click Remove, to stop using current file.
File Path – Path, where PAC settings file is located.
OK – Closes profile configuration and saves settings.
Cancel – Closes profile configuration without saving settings.
horNET P6121-L4 / P6122-12
time) to the client automatically.
16
It only supported
Allow