Advertisement
3. Press the "Jump-Start" button and wait for solid green light.
NOTE: A flashing green light indicates safety checks are in progress.
Figure 4
Do not disconnect the jumper cables when the Jump-Start button is illuminated solid green. If you wish
to cancel a jump-start attempt, simply press the Jump-Start button again and the solid green light will turn off
indicating that the jump-start attempt has been cancelled.
4. Start your vehicle.
NOTE: If your vehicle fails to start after the first attempt, wait 30 seconds and repeat step 3 and step 4. If your
vehicle does not start after three attempts, we recommend you consult a certified mechanic.
5. Disconnect the jumper cable clamps from the car battery.
NOTE:
•
The jump start function can not be used in conjunction with USB charging or the air compressor. Please
ensure that you have not activated the USB or Air Compressor output modes when attempting to jump
start your vehicle.
•
When attempting to jump-start your vehicle, turn off your headlights and any other components that
may drain your car battery.
•
The powerstation go rugged with air compressor is designed to allow a jump start when used within
a safe temperature range. A "TEMP" indicator will be illustrated on the digital display if used outside of
the temperature operating range
Advertisement
