Advertisement
air compressor will automatically begin charging. When the powerstation go rugged with air compressor is
fully charged, all battery indicator lights will be solid white and the digital screen will indicate 100% charge.
(This could take up to 9 hours). When fully charged, disconnect the cable.
NOTE:
•
The powerstation go rugged with air compressor is designed to charge between 32°F-113°F (0-45° C).
A "TEMP" indicator will be illustrated on the digital display if the powerstation go rugged with air
compressor is attempted to be charged outside of this temperature range.
Figure 1
Jump starting a vehicle
1. Plug the jumper cables into the jump-start output on the powerstation go rugged with air compressor.
NOTE: Make sure the jumper cables are fully plugged into the jump-start output before trying to jump
start your vehicle.
Figure 2
2. Attach the jumper cable clamps to the vehicle battery.
•
Red clamp on positive terminal (+)
•
Black clamp on negative terminal (-)
NOTE:
•
Once the jumper cable clamps are attached to the vehicle battery, the LCD will display the vehicle
battery voltage.
•
Do not touch red (positive) and black (negative) clamps together at any point. If the jump start button
flashes red, the jumper cables have been connected incorrectly. If this flashing red condition occurs,
disconnect the jumper cables from vehicle battery and restart the process from Step 1.
Figure 3
Advertisement
