Download Print this page

Important Safety Instructions - Mophie powerstation go rugged with air compressor Operating Instructions Manual

Advertisement

IMPORTANT SAFETY INSTRUCTIONS

Warning
DANGER-CAUTION Read and understand all safety information before using this product. Failure
to follow these instructions may result in electrical shock, explosion, fire which may result in serious
injuries, death or property damage.
N When used correctly, lithium- ion rechargeable batteries provide a safe and dependable source of portable
power. However, if they are misused or abused, this may result in leakage, burns, fire or explosion, causing
personal injury or damage to other devices.
N Misusing or incorrectly connecting your powerstation go rugged with air compressor may cause electric
shock to users and damage equipment.
N Do not operate in explosive atmospheres such as in the presence of flammable liquids, gases or dust.
N Remove jump start clamps from vehicle battery after jump starting vehicle.
N Keep your powerstation go rugged with air compressor dry and away from moisture and corrosive
materials. The powerstation go rugged with air compressor should not be used near water or wet areas
such as bathtubs, showers, bathrooms, sinks, swimming pools or basements.
N Do not expose your powerstation go rugged with air compressor to moisture, water, rain, or snow.
N Keep your powerstation go rugged with air compressor away from heat sources, including open flames,
radiators, stoves, ovens, and any other devices that product heat.
N The lithium-ion rechargeable battery used in this charging device may present a risk of fire or chemical
burn if mistreated. Do not expose to fire or excessive temperature. Do not expose to heat above 212°F
(100°C) or incinerate.
N In the unlikely event of leakage or explosion use sand or a chemical fire extinguisher.
N Your powerstation go rugged with air compressor may become warm under extended high power
operation. Do not cover, wrap, or otherwise restrict the powerstation go rugged with air compressor
during operation.
N Do not disassemble your powerstation go rugged with air compressor. There are no user-serviceable parts
inside. Incorrect reassembly may result in shock or fire hazard.
N Do not drop or subject to strong impacts. Do not operate your powerstation go rugged with air compressor
if it has received a sharp blow, or has otherwise been damaged in any way.
N Do not puncture, crush or subject to mechanical shock.
N Only charge your powerstation go rugged with air compressor by the specified method with the specified
charging adapter provided with the unit.
N Do not use any non-mophie-branded accessories with the powerstation go rugged with air compressor.
Doing so may cause electric shock to users and damage equipment.
N The powerstation go rugged with air compressor, along with its accessories, are not toys and should be
kept away from children.
N Make sure the jumper cables are fully plugged into the jump start output before trying to jumpstart
your vehicle.
N Do not touch red (positive) and black (negative) jumper clamps together at any point.
N Do not insert any foreign object into the ports or openings of your powerstation go rugged with
air compressor.
N Do not clean your powerstation go rugged with air compressor with harsh chemicals, soaps or detergents.
Just wipe the case with a soft cloth.
N Make sure the powerstation go rugged with air compressor's charging ports do not become
contaminated with lint or other debris. Use a canned-air type of product periodically to ensure that the
port openings are clear.
N When using the air compressor, always check and follow the manufacturer's recommended pressure. Use
caution as the air hose and connectors may get hot after extended use.
N Batteries should be recycled or disposed of as per state and local guidelines.
N Storage: 4°F - 158°F (-15°C - 70°C), Discharge: 14°F - 140°F (-10°C - 60°C), Charge: 32°F - 113°F (0°C - 45°C)
SAVE THESE INSTRUCTIONS
Charging your powerstation go rugged with air compressor
IMPORTANT: Before using the powerstation go rugged with air compressor for the first time, fully charge it (so
that pressing any button lights up all four LEDs on the LED Battery Indicators).
To charge your powerstation go rugged with air compressor, use the provided wall charging adapter, and the
provided USB Type-C cable. Next, connect the AC adapter into a wall outlet. The powerstation go rugged with

Advertisement

loading

This manual is also suitable for:

Mpsgrgd-air55500