| Installing the Switch
C
3
HAPTER
Installing an Optional SFP Transceiver
ES-3026/3026P
D
S
ESKTOP OR
HELF
M
OUNTING
I
O
NSTALLING AN
PTIONAL
Attach the four adhesive feet to the bottom of the first switch.
1.
Figure 15: Attaching the Adhesive Feet
Set the device on a flat surface near an AC power source, making sure
2.
there are at least two inches of space on all sides for proper air flow.
If installing a single switch only, go to
3.
on page
33, at the end of this chapter.
If installing multiple switches, attach four adhesive feet to each one.
4.
Place each device squarely on top of the one below, in any order.
SFP T
RANSCEIVER
Figure 16: Installing an Optional SFP Transceiver into a Slot
– 32 –
"Connecting to a Power Source"