Related Manuals for KAP FORD-SYNC3-TDC2
Summary of Contents for KAP FORD-SYNC3-TDC2
- Page 1 Instruction Manual FORD-SYNC3-TDC2 Ford Video Interface VIDEO INTERFACE FS-PAS-170830 MODEL. 2019.07.26 D A T E . Korea Auto Parts www.kaptrade.com...
- Page 2 Spec 1. Input Spec. (MULTI VIDEO INTERFACE) • 1 x Digital RGB Input (Navigation System source) • 1 x Analog RGB Input (Navigation System source) • 1 x CVBS(REAR CAMERA) Input (Rear camera source) • 1 x CVBS(FRONT CAMERA) Input (Front camera source) •...
-
Page 3: External Appearance
External Appearance PROGRAM IMAGE DIP S/W Power/CAN Digital Touch NAVI FRONT REAR... -
Page 4: Connector Pin Assignment
Connector Pin Assignment POWER Connect (16Pin) ■ ■ ■ ■ ■ Color YELLOW BROWN GREEN BLACK REAR DET CAN-L FRONT VCC Connect ■ ■ ■ ■ ■ Color BLUE ORANGE GREEN BLACK FRONT DET CAN-H REAR VCC MODE Connect NAVI TOUCH Connect (4Pin) ■... -
Page 5: Product Composition
Product Composition Interface RGB NAVI Cable Power Cable Mode S/W OSD Board LVDS IN Cable LVDS OUT Cable... -
Page 6: Dip Switch Setting
Dip Switch Setting OFF : ▲UP ON : ▼DOWN FUNCTION DIP S/W Selection ON : Not Used NAVI OFF : Used ON : Not Used DVB-T(AV1) OFF : Used ON : Not Used DVD(AV2) OFF : Used CAR type SEL Bottom Picture Car Type Select FORD... -
Page 7: Mode Change
Mode Change Steering Wheel Button Control – F150 Basic Mode Change Button LEFT Switch mode by pressing for 1.5 seconds • Short press to switch OEM • VOICE Switch mode by pressing for 3 seconds • Short press to switch OEM •... - Page 8 Mode Change Steering Wheel Button Control – Mustang Steering Wheel Button Control – Ranger Mode Change Button LEFT Switch mode by pressing for 1.5 seconds • Short press to switch OEM • VOICE Switch mode by pressing for 3 seconds •...
- Page 9 Mode Change Steering Wheel Button Control – Lincoln MKX Mode Change Button LEFT Switch mode by pressing for 1.5 seconds • Short press to switch OEM • VOICE Switch mode by pressing for 3 seconds • Short press to switch OEM •...
-
Page 10: Touch Control
Touch Control Touch Calibration / DVBT, DVD Control Method 1 Method 2 • Touch the screen for 11 seconds • OSD menu ▶ Utility ▶ Calibration Touch Calibration • + Touch according to the shape coordinates. Press Touch (Anywhere) Press Icon DVBT... - Page 11 OSD Control OSD(On Screen Display) Control Board MENU DOWN • The OSD screen can be switched ON/OFF MENU • Return to previous menu • Select the currently active item • If the OSD screen is off, mode changes can be made. •...
- Page 12 OSD Control Config First Menu Second Menu Third Menu Description DIGTAL- NAVI-RGB INAVI Setting the Connected NAVI Model ELT_DVBT20 DVB-T(DMB) Setting the Connected DVB-T Model Config ELT_980XU Slim Setting the Connected DVD Model Reset Execute Reset to default value of Config menu...
- Page 13 OSD Control Option First Menu Second Menu Third Menu Description Original Camera RearCam-Type ExtDevice Equipped with external camera + 12V continuous supply RearCam-Power AUTO + 12V supply only in Rear camera mode + 12V off Detected by CAN RearCam-Det WIRE Detected by Rear-Det Wire Option Video(CVBS) Input...
- Page 14 OSD Control Option First Menu Second Menu Third Menu Description Detected by CAN FrontCam-Det WIRE Detected by Front-Det Wire After RearCam shows FrontCam and returns to the previous state FrontCam- RcvOpt Disable feature Use the ‘Left’ button on the right side of LEFT the handle Steering Wheel...
- Page 15 OSD Control Option First Menu Second Menu Third Menu Description Switch to OEM screen when bluetooth phone comes in, return to original when phone terminated ScrChg-Call Disable feature When there is a change of air conditioning, it switches to OEM screen for 2 seconds and then returns to original state ScrChg_Climate Disable feature...
- Page 16 OSD Control Option ▶ FrontCam-RcvOpt Front Camera Auto Mode 0 second 1~30 second FrontCam-RcvOpt Menu OFF FrontCam-RcvOpt Menu ON & time control NAVI NAVI REAR FRONT CAMERA CAMERA AV1(DVB-T) AV1(DVB-T) AV2(DVD) AV2(DVD) Select time of display 0~30 second Option ▶ SrcChg-Call Setup for switching from external screen to OEM phone mode screen automatically when phone rings Phone Phone...
- Page 17 OSD Control Option ▶ SrcChg-Climate Setup for switching from external screen to OEM mode screen automatically when changing climate value Option ▶ Audio-Vol Setup for switching from external screen to OEM mode screen automatically when changing audio volume level NAVI NAVI AV1(DVB-T) AV1(DVB-T)
- Page 18 OSD Control Image NAVI – RGB Menu First Menu Second Menu Third Menu Description Brightness Adjust the value of brightness Contrast Adjust the value of contrast Color-RED Adjust the value of RED Image Color-GREEN Adjust the value of GREEN Color-BLUE Adjust the value of BLUE Reset Execute...
- Page 19 OSD Control Screen First Menu Second Menu Third Menu Description Horizontal Output screen horizontal movement Vertical Output screen vertical movement Scale X Up Reduce / increase output screen width Screen Scale X Down Scale Y Up Reduce / Increase Output Screen Height Scale Y Down Reset Screen menu all reset...
- Page 20 OSD Control Parking First Menu Second Menu Third Menu Description Show OPS OPS Display Do not show OPS Show parking line Line Display Do not show parking lines Parking Warnings Lang Set warning text language Horizontal Moving a parking line horizontally Vertical Moving a parking line vertically Transparency...
- Page 21 OSD Control Parking – Change warning message language...
- Page 22 OSD Control Parking – Adjust the position of parking guideline MENU DOWN • Pressing this Horizontal / Vertical menu, The OSD screen automatically disappears. • Possible to adjust the position of parking guide line by Keypad in Horizontal / Vertical menu •...
- Page 23 OSD Control First Menu Second Menu Third Menu Description value Horizontal OSD Menu Horizontal Shift value Vertical OSD menu vertical Shift value Display Time OSD Menu Display Time (in seconds) value Transparency OSD menu transparency Language OSD menu display language Reset Execute Initialize OSD settings...
- Page 24 OSD Control Utility First Menu Second Menu Third Menu Description Factory Reset Execute Initialize all settings Calibration Execute Run Calibration mode Utility FDS302KRX-171004 Version (Check for future upgrades) • Last Source : FDS302KRX-171004 FD S3 02 KR X - 17 10 04 Motor Model Hardware National...
- Page 25 OSD Control Installation Navigation (Digital) Connection • OSD setting must be done before Navigation can be used Screen Settings (Digital) Config ▶ NAVI RGB ▶ DGT-0000 DGT-0000 DGT = DIGITAL • When DGT (DIGITAL) is selected, it is output to the screen. •...
-
Page 26: Video Interface
Install Manual Installation ROiK Navigation Connection DIP switch No.1 is OFF Interface Dip Switch FORD-SYNC3-TDC2 VIDEO INTERFACE Button Using Navigation AV1, 2 Setting 6,7,8 Select vehicle type POWER/CAN TOUCH FRONT REAR LVDS-OUT DIGITAL NAVI 16. GND (Black) HDMI Cable 15. GND (Black) 14. - Page 27 Install Manual Installation ROiK Navigation Connection • After connecting the cables, you need to set the OSD to use the UART touch • Since it is not touch yet, Interface controls OSD board ROiK with Mouse Control INTERFACE Settings (Control with OSD board) Config ▶...
- Page 28 Install Manual Installation Navigation Connection FORD-SYNC3-TDC2 VIDEO INTERFACE LVDS-IN POWER/CAN TOUCH NAVI FRONT REAR LVDS-OUT DIGITAL DVD-IR 16. GND (Black) DVBT-IR 15. GND (Black) 14. Mode (Green) 13. Front-VCC (Red) SYNC 12. Rear-VCC (Red) BLUE 11. N.C 10. N.C GREEN 9.
- Page 29 Install Manual Installation DVB-T Remote Control Connection FORD-SYNC3-TDC2 VIDEO INTERFACE LVDS-IN POWER/CAN DIGITAL TOUCH NAVI FRONT REAR LVDS-OUT DVD-IR DVBT-IR SYNC 16. GND (Black) BLUE 15. GND (Black) 14. Mode (Green) GREEN 13. Front-VCC (Red) 12. Rear-VCC (Red) 11. N.C 10.
- Page 30 Install Manual Installation DVD Remote Control Connection FORD-SYNC3-TDC2 VIDEO INTERFACE LVDS-IN POWER/CAN DIGITAL TOUCH NAVI FRONT REAR LVDS-OUT DVD-IR DVBT-IR SYNC 16. GND (Black) BLUE 15. GND (Black) 14. Mode (Green) GREEN 13. Front-VCC (Red) 12. Rear-VCC (Red) 11. N.C 10.
- Page 31 Install Manual Installation External Reverse(Rear) Camera Connection FORD-SYNC3-TDC2 VIDEO INTERFACE REAR LVDS-OUT LVDS-IN POWER/CAN DIGITAL TOUCH NAVI FRONT REAR-GND (Black) 16. GND (Black) 15. GND (Black) 14. Mode (Green) 13. Front-VCC (Red) 12. Rear-VCC (Red) REAR-POWER 11. N.C 10. N.C (Red) 9.
- Page 32 Install Manual Installation External Front Camera Connection FORD-SYNC3-TDC2 VIDEO INTERFACE LVDS-IN REAR LVDS-OUT POWER/CAN DIGITAL TOUCH NAVI FRONT 16. GND (Black) 15. GND (Black) FRONT-GND (Black) 14. Mode (Green) 13. Front-VCC (Red) 12. Rear-VCC (Red) FRONT-POWER (Red) 11. N.C 10. N.C 9.
- Page 33 Install Manual Installation LVDS connection FORD-SYNC3-TDC2 VIDEO INTERFACE LVDS-IN REAR LVDS-OUT POWER/CAN DIGITAL TOUCH NAVI FRONT Navigation...
- Page 34 Q&A 1. Check the LED status first when interface failure - If there is no abnormality after the power is applied, the green LED flashes in units of 1 second. - If the red LED flashes for 1 second, there is no. - If the red LED is on continuously, the interface itself is bad.
- Page 35 A-912 RM Tera-Tower2, 201 Songpa-Daero, Songpa-gu, Seoul, Korea F. (+82) 6204-0913 E. kap@kaptrader.com...