Setting Up The Card Slot As The Memory Card Drive Of The Computer - Canon i900D Series Printing Manual

Setting up the Card Slot as the Memory Card Drive of
the Computer
The memory card slot can be used as a memory card drive on the computer.
Important To use the card slot of the printer as the memory card drive of the computer,
the printer must be connected to the computer and the Memory Card Utility
(Windows) or BJ Utility (Macintosh) must have been installed in the
computer. If the utility is not installed, install it following the installation
procedure explained in the
When Read/write mode
done.
After you are finished with using the card slot as a memory card drive for
your computer, be sure to select Read-only mode
W
1
Ensure that the printer and the computer are turned on.
2
Open the USB memory card setup window.
(1) Ensure that no memory card is inserted in the card slot. If a memory card is
inserted in the card slot, remove it. See "Removing a Memory Card" on page 9.
(2) Select All Programs
Utilities, Memory Card Utility Utilities Utilities Utilities
The USB Memory Card Settings USB Memory Card Settings USB Memory Card Settings window appears. USB Memory Card Settings
3
Specify the read/write attribute.
(1) Click Next Next.
Next Next
The Read/write attribute setting Read/write attribute setting window appears. Read/write attribute setting Read/write attribute setting
(4) Click Complete Complete.
Complete Complete
The selected read/write attribute is saved.
Read/write mode Read/write mode is selected, neither printing nor maintenance can be Read/write mode
All Programs (or Programs Programs) from the Start
All Programs All Programs Programs Programs
Memory Card Utility, and then USB Memory Card Settings Memory Card Utility Memory Card Utility
Easy Setup Instructions
Read-only mode again.
Read-only mode Read-only mode
Start menu. Next, select Canon
Start Start
USB Memory Card Settings USB Memory Card Settings. USB Memory Card Settings
(2) Specify the read/write attribute.
Read-only mode Read-only mode
Read-only mode Read-only mode
... The card slot is used only for reading.
Be sure to select this mode when printing
images.
Read/write mode Read/write mode
Read/write mode Read/write mode
... The card slot is used as the memory card
drive of the computer. Image data can be
written into the memory card.
(3) Click Next Next. Next Next
When you have selected Read/write mode
read the precaution and click Next
.
Canon
Canon Canon
Read/write mode,
Read/write mode Read/write mode
Next. Next Next
31