Canon i900D Series Printing Manual page 18

1
Set the Trimming Mode.
(1) Display the setting screens for Printing an Image, Specify images
layout. layout
layout layout
See "Printing an Image Displayed on the LCD" on page 10.
See "Specifying how many copies to print for each image" on page 15.
See "Specifying the layout" on page 20.
(2) Press the Trimming
The printer is now in Trimming Mode.
2
Trimming and Rotating the Sections you wish to Print.
3
Finalize the trimmed area.
(1) Press the OK
The trimming area is finalized and the screen returns to the state when the
Trimming button was pushed. Trimming
Trimming Trimming
This mark indicates that
Trimming Trimming is set. Trimming Trimming
Trimming Trimming button. Trimming
Rotate the trimming area
Using the Trimming
trimming area.
Move the area for trimming
Using the
trimming area.
Enlarge/Reduce the area for trimming
Using the
the trimming area.
Trimming Trimming
Trimming Trimming
Button
OK OK button. OK
Trimming button, you can rotate the
Trimming Trimming
buttons, you can move the
buttons, you can enlarge or reduce
Once the trimmed area is finalized, if
Notes
you press the Trimming
you can modify the trimmed area.
If you want to cancel the Trimming
setting, press the Trimming
and then the Cancel
Trimming screen. Trimming Trimming Trimming
Specify images and Select Specify images Specify images
Trimming button again,
Trimming Trimming
Trimming Trimming Trimming
Trimming button
Trimming Trimming
Cancel button in the
Cancel Cancel
Select Select Select
17