Canon i475D Series Quick Start Manual page 37

Printing Maintenance
(2) Double-click the Print Center
(3) Select i475D from the Name
(4) Select i475D from the Product
3
Start Print Head Cleaning.
(3) Select the ink nozzles to be cleaned, and then click OK
(4) When the confirmation message is displayed, click OK
Important Do not perform any other operations until the print head cleaning
Note
32
Print Center icon.
Print Center Print Center
Name list and click Configure
Name Name
Product list and click Select
Product Product
finishes. This takes about 50 seconds.
Print head cleaning can also be performed from the printer itself.
Ensure that the printer is turned on. Hold down the Resume
until the Power Power lamp flashes once. Power Power
After print head cleaning finishes, print the nozzle check pattern to
verify that the print head nozzles are clean.
See "Printing the Nozzle Check Pattern Printing the Nozzle Check Pattern Printing the Nozzle Check Pattern" Printing the Nozzle Check Pattern
If the problem persists, perform print head deep cleaning.
See "Print Head Deep Cleaning Print Head Deep Cleaning"
Print Head Deep Cleaning Print Head Deep Cleaning
Configure.
Configure Configure
Select.
Select Select
(1)
Select Cleaning
from the pop-up
menu.
(2)
Click Cleaning Cleaning. Cleaning Cleaning
OK. OK OK
OK OK. OK
on page 28.
on page 33.
Cleaning
Cleaning Cleaning
Resume button Resume Resume