Canon i470D Series Setup Instructions

1
Unpack the Printer
1 Carefully remove all items from the box.
i470D Series
Photo Printer
Paper Rest
Documentation
and Software Kit
i470D Series Print Head Power Cord
Ink Tanks
BCI-24 Black BCI-24 Color
2
Prepare the Printer
1 Remove all shipping tape from the front
and sides of the printer.
Shipping
Tape
2 Plug the power cord into the back of the
printer and connect the other end to a
power outlet.
Press the Power button.
3
Power Power
Button Lamp
Open the output tray, then open the front
4
cover. The print head holder automatically
moves to the center.
Output Tray
Serial number
Write down the serial number located to
the right of the print head. You will need
this later to register the product.

Start Here

Easy Setup Instructions
3
Install the Print Head
Remove the print head from its package.
1
Tear at notch to open
2 Remove the orange protective cap.
NOTE: Do not touch the electrical contacts
on the back and bottom of the print head.
Electrical
contacts
3 Raise the gray lock lever on the printer.
4 Slide the print head into the holder until
it is securely seated.
Do not press it down.
5
Lower the lever until it locks into place.
4
Install the Ink Tanks
1 Remove the black ink tank (BCI-24 Black)
from its package and pull off the orange
protective cap.
NOTE: To avoid spilling ink, do not touch
the bottom of the tank once you have
removed the protective cap.
Protective cap
2 Insert the black ink tank into the slot on
the right, then push in until the ink tank
locks into place.
Click
3
Repeat the procedure for the color ink
tank (BCI-24 Color), inserting it into the
remaining slot.
4 Close the front cover, attach the paper rest
and pull out the output tray.
i470D
Series
Photo Printer
5 Connect the Printer
To Your Computer
Turn the printer off.
1
IMPORTANT: Be sure printer is
off before continuing, or the
computer will attempt to install
the printer driver before the
printer is ready.
2 Connect one end of a USB cable (not
included) to the computer, the other to
the printer.
USB Port
USB Cable
Continue with Step 6
on side two.