Ice Cube Maker
WARNING: Do not use any mechanical devices or means other
■
than those recommended by the manufacturer to speed up the
defrosting process.
WARNING: Do not damage the refrigerant circuit.
■
WARNING: Do not operate any electrical devices within the
■
refrigerator compartment that do not correspond to the type
recommended by the manufacturer.
Do not store any potentially explosive substances, such as aer-
■
osol cans containing a fl ammable propellant, in this device.
WARNING: When the device is set up, it must be ensured that
■
the connecting cable is not jammed or damaged.
WARNING: Do not place portable multiple sockets or mains
■
adapters on the back of the device.
The device may only be transported upright! When the de-
■
vice is transported and set up, make sure that the device does
not exceed an angle of 45°. The compressor and the cooling
system could be damaged.
The device must always be disconnected from the mains power
■
when it is left unattended and before transporting or cleaning
the device.
Do not make any modifi cations to the device. Also do not
■
replace the connecting cable yourself. If the device, the con-
necting cable or the accessories of the device are damaged,
they must be replaced or repaired by the manufacturer, cus-
tomer service department or a specialist workshop in order to
avoid any hazards.
Follow the cleaning instructions in the "Cleaning and Storage"
■
chapter!
02031_Inlay_DE-EN-FR-NL_A5_V1.indb 13
02031_Inlay_DE-EN-FR-NL_A5_V1.indb 13
EN
13
19.11.2020 13:18:25
19.11.2020 13:18:25