Phone Pairing - Sena M1 EVO Quick Start Manual

QUICK START GUIDE

Phone Pairing

There are three ways to pair the phone.
Initially Pairing the M1 EVO
The Bluetooth system will automatically enter the phone pairing mode
when you initially turn on the Bluetooth system or in the following
situation:
• Rebooting after executing Factory Reset
=
Alternating blue and red flashing lights indicate the device is
now discoverable. With your mobile phone in Bluetooth-pairing
=
mode, select M1 EVO in the list of devices detected.
LED
STATUS
=
PIN
NUMBER
Note:
• The phone pairing mode lasts for 3 minutes.
• To cancel phone pairing, tap the Center Button.
HOLD
1s