Huawei ZTE MU500 User Manual page 14

SETTINGS > WI-FI SETTINGS > ADVANCED SETTINGS
 You can change the Wi-Fi settings to suit your personal choices or for specific requirements of your
attached devices.
 Press Apply to save your changes
 Press the Help icon
SETTINGS > WI-FI SETTINGS > WPS
 WPS uses the push button on the front panel to connect seamlessly to supported devices.
 Press WPS to enable, compatible devices can connect to your Wi-Fi network without authorisation, or
you can set a PIN if required.
 WPS is enabled for 2 minutes once pressed and the device LED's will flash to indicate WPS mode.
 If you have enabled PIN mode then you need to enter the same PIN on devices you wish to connect.
 Press the Help icon
to get in context tips
to get in context tips
Page 14 of 25