Huawei ZTE MU500 User Manual page 11

SETTINGS > NETWORK SETTINGS > WAN CONNECTION MODE:
The default connection setting will automatically connect to the network. The setting is greyed out if
you are connected.
 Press the Disconnect button to change this setting and to enable International Roaming if required.
 If you make any changes, press Apply to save the change
 Press the Help icon
SETTINGS > NETWORK SETTINGS > NETWORK SELECTION:
 Network Selection is set to Automatic by default.
 Press the Disconnect button to change this setting if required.
 If you make any changes, press Apply to save the change
 Press the Help icon
 There is no need to change these settings unless you change service provider or are instructed by
your carrier.
 If you use a SIM card from another provider you may not be able to connect to their network.
 Consult Telstra to obtain the unlock code for your device.
to get in context tips.
to get in context tips.
Page 11 of 25