Maytag 4KMEDC100 Use And Care Manual page 7

USING YOUR DRYER
1.
Clean the lint screen
Check the lint screen before each load. Pull the lint screen
straight up. Roll lint off the screen with your fingers. Do not
rinse or wash screen to remove lint. Push the lint screen firmly
back into place.
For additional cleaning information, see "Dryer Care."
2.
Load the dryer
Place laundry in the dryer. Close the door. Do not overload the
dryer; clothes should be able to tumble freely.
NOTE: Your model may have a different door than the one
shown. Some models have drop down doors.
WARNING
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
Items containing foam, rubber, or plastic must be dried
on a clothesline or by using an Air Cycle.
Failure to follow these instructions can result in death
or fire.
3.
Select the desired cycle
Appearance may vary
Select the desired cycle for your load. See the Cycle Guide for
more information about each cycle.
AUTOMATIC DRY Cycles
You can select a different dryness level, depending on your
load, by turning the knob to dryness level.
Selecting More Dry, Normal, Energy Preferred or Less Dry
automatically adjusts the dryness level of the fabrics at which
the dryer will shut off.
AUTOMATIC DRY cycles give the best drying in the shortest
time. Drying time varies based on fabric type, load size, and
dryness setting. Less Dry removes less moisture and is used
for loads you may want to put on a hanger to complete drying.
More Dry removes more load moisture. Energy Preferred is
used for a starting point for AUTOMATIC DRY cycles.
Fire Hazard
7