Maytag 4KMEDC100 Use And Care Manual page 6

CYCLE GUIDE — AUTOMATIC DRY CYCLES
AUTOMATIC DRY - Senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level.
Not all cycles and settings are available on all models. Settings and options shown in bold are default settings for that cycle.
NOTE- Government energy certifications for the Maytag Gas and Electric models were based on the Timed Dry cycle with the
Maximum drying temperature setting. The as - shipped defaults of Sensor Dry, Automatic Dry, Normal cycle, Low heat, Wrinkle Shield
were not used.
Items to dry:
Jeans, heavy work
clothes, towels
Work clothes, medium
weight fabrics, sheets
Casual, shirts, pants,
lightweight items,
synthetics, delicates,
athletic wear
NOTE: If loads do not seem as dry as you would like, select More Dry next time you dry a similar load. If loads seem drier than you
like, select Less Dry next time you dry a similar load.
CYCLE GUIDE — TIMED DRY CYCLES
TIMED DRY - Will run the dryer for the specified time on the control.
Not all cycles and settings are available on all models.
Items to dry:
Heavy or bulky items
Any load
Rubber, plastic, heat
sensitive fabrics
Setting the Drying Temperature
If your dryer has multiple heat settings:
A High Heavy temperature setting may be used for drying
heavyweight items such as towels and work clothes.
A Low Delicate to Medium Casual temperature setting may
be used for drying medium-weight items such as sheets,
blouses, dresses, underwear, permanent press fabrics, and
some knits.
6
Dryness Level: Temperature /
High / Heavy
More Dry Medium / Casual
Normal
Energy Preferred
Low / Delicate
Less Dry
Cycle:
Temperature:
High
High Heat
Low Heat Low
Freshen Up Any
Air Fluff No Heat
Available
Fabric: Options:
Temperature/
Fabric
End of Cycle
Signal
Available
Options:
Temperature/ Completes drying if items are still damp.
Fabric
End of Cycle
Use low to medium temperature to smooth out
Signal
wrinkles, such as those found in clothes packed
in a suitcase or in items wrinkled from being left
in the dryer too long.
End of Cycle No heat drying.
Signal
Use the Air Fluff (no heat) setting for foam, rubber, plastic,
or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for
various loads, refer to the care label directions.
Cycle Details:
Automatic cycles give the best drying
in the shortest time. Drying time varies
based on fabric type, load size, and
dryness setting.
Select a drying temperature based on
the fabrics in your load. If you are unsure
of the temperature to select for a load,
select the lower setting rather than the
higher setting.
Cycle Details: