Troubleshooting; Error Messages And Remedies - Xylem FLYGT EOP1 Installation, Operation And Maintenance Manual

Troubleshooting

Troubleshooting

Error messages and remedies

Message
Select Drive Address xx
Err-id
SC-OBS
12
Description
The operator panel fails to
communicate with the specified
drive address in the network.
There are two operator panels in the
same drive network and both have
the same device number.
The communication link between the
drive and the operator panel fails
during operation.
EOP1 Operator Panel Installation, Operation, and Maintenance manual
Remedy
• Check that the cable is correctly connected.
• Check that the drive with address xx is in the network. If xx is
more than 1 and only one operator panel is connected, then
check that the operator panel device number is 1.
Change the device number of one of the operator panels.
• Check the electrical connection.
• Ensure that the data cable is correctly connected between the
drive and the operator panel.
• Press the off button so that the operator panel searches for
the drive.
• Check that all drives in the system have different addresses.