Change The Display Language; Display Messages - Xylem FLYGT EOP1 Installation, Operation And Maintenance Manual

Change the display language

1. Press the on and up buttons at the same time.
2. Select the requested language by use of the up or down buttons.
3. Press the navigate button to select and activate the requested language.

Display messages

Drive messages and trip codes
Any information displayed that is not related to the operator panel refers to the drive
connected. See the Installation, Operation, and Maintenance manual for the drive.
The fault code from the connected drive is displayed when there is a fault or trip in the
drive. For a list of the drive fault codes, see the Troubleshooting chapter in the Installation,
Operation, and Maintenance manual for the drive.
Operator panel messages
Message
Scanning for Drive xx
Load ...
SC-OBS
Select Language
Select Drive Address xx
Select Optipad ID
EOP1 Operator Panel Installation, Operation, and Maintenance manual
System Setup and Operation
Description
The operator panel searches for the drive with address xx
in the network.
The operator panel detects the drive and reads the
configuration information from the drive.
The communication link between the drive and the
operator panel has failed.
The operator panel has a list of available languages in the
language selection screen.
The operator panel displays this message when trying to
communicate with the drive.
Two operator panels can connect to a single drive or
network of multiple drives.
11