Advertisement
Basic Printing
T T o o l l o o a a d d e e n n v v e e l l o o p p e e s s : :
1. Lift the cover and set the paper thickness lever to the envelope mark. Close
the cover.
2. Slide the paper feed guide to the left.
3. Press down on the corners
and sides of the envelopes
to make them as flat as
possible by expelling all of
the air.
To avoid paper jams, make
sure envelopes are flat
before you load them into
the paper tray.
4. With the address side facing
up and pointed in the
direction shown in the
illustration, align the stack
with the right side of the
paper rest, then insert the
stack into the printer.
5. Slide the paper guide to the
edge of the envelopes until it
is firmly in place.
6 6
Make sure that none of the flaps overlap. If the envelope
edges are not flat, crease them with the side of a pen.
Do not allow more than 10 envelopes to stack on the paper
output tray.
Flap side of envelope faces down
Advertisement
