If operating a power tool in a damp location is Intended use unavoidable, use a residual current device (RCD) Your BLACK+DECKER multi-purpose tool MT350 has been protected supply. Use of an RCD reduces the risk of designed for a wide range of DIY applications.
ENGLISH (Original instructions) f. Dress properly. Do not wear loose clothing or will ensure that the safety of the power tool is maintained. jewellery. Keep your hair, clothing and gloves away Additional power tool safety warnings from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
If you do not yet know the appropriate setting, proceed as If the supply cord is damaged, it must be replaced by the follows: manufacturer or an authorised BLACK+DECKER Service Set the collar (6) to position 1. Centre in order to avoid a hazard.
Drilling Always apply a light pressure in a straight line with the drill Should you find one day that your BLACK+DECKER product bit. needs replacement, or if it is of no further use to you, do not Just before the drill tip breaks through the other side of the dispose of it with household waste.
Page 7
Standard equipment and accessories may vary by country. Product specifications may differ by country. Complete product range may not be available in all countries. Contact your local BLACK+DECKER dealers for range availability.
Need help?
Do you have a question about the MT350 and is the answer not in the manual?
Questions and answers