1. Getting Started
1.1 Safety Precautions
Warning!
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive
electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should
open the PC chassis.
Caution!
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution,
use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded
bag when they are not in the chassis.
1.2 Packing List
1 x EMS-TGL 11th Gen Intel®Core™ Processor i7/i5/i3 Fanless
Rugged Embedded System
1 x Terminal block to lockable DC Jack cable
1 x DP to VGA Converter
1 x Screw driver for chassis
1 x Wire tie for HDMI
1 x 60W adapter (optional)
1 x Power cord (optional)
1 x Thermal pad for M.2 NVMe SSD
EMS-TGL Series Quick Reference Guide
Quick Reference Guide
7