Troubleshooting - Canon PIXMA MX850 SERIES Network Setup Manual

Troubleshooting

This section describes troubleshooting tips for problems you may encounter when setting up.
Note
If you do not find a description for your trouble here, refer to "Troubleshooting" in the User's Guide on-
screen manual.
Troubles in setup/connections
"Cannot Install the MP Drivers" on page 31
"Cannot Connect to the Machine (the machine is not detected)" on page 32
"The Following Screen Is Displayed during Setup" on page 33
• "The Set Printer IP Address dialog box is displayed" on page 33
• "The Enter Password dialog box is displayed" on page 34
• ""Communication with the Card Slot failed." is displayed" on page 35
• ""The Card Slot is already mapped as Network Drive to this computer." is displayed"
on page 36
• ""Cannot map any more drives, because all the drive letters are assigned." is
displayed" on page 36
Other troubles
Refer to "Troubleshooting" in the User's Guide on-screen manual.
Other useful information
"Setting Up the Machine Again for Use over Network" on page 37
"Changing the Port Name (Windows)" on page 37
"Checking Information about the Network" on page 38
30 Troubleshooting